Housing (L) Block, Cushion Aori-1 (L-Ch) - Sony WH-1000XM3 Service Manual

WH-1000XM3

2-14. HOUSING (L) BLOCK, CUSHION AORI-1 (L-ch)

• Continued on 2-15 (page 22).
1 wire sheet
2 Remove the relay cable
from the groove.
(See Fig. S)
3 Remove nine solders
of the relay cable.
(See Fig. R)
4 sheet solder protection
(See Fig. Q)
Do not remove
these wires.
21
(See Fig. T, U)
Do not remove
these wires.
5 Remove four solders
of the relay cable.
(See Fig. P)
Install each wire as shown figure below.
relay cable
[red/black]
[red/blue/natural]
– –
sheet solder
protection
sheet solder
guide line
protection
L MAIN board
[natural]
[red/green]
[black]
[dark blue]
[white]
[purple]
[blue/natural]
L MAIN board
Push the relay cable
into the groove.
relay cable
wire sheet
relay cable
L MAIN board
MIC wire (black)
Sony CONFIDENTIAL
For Authorized Servicer
[blue]
[green]
L MAIN board
L MAIN board
sheet solder
protection
relay cable
[blue/black] [red]
relay cable
L MAIN
board
Press.
MIC wire
(black)
Note: Check that all wires do not
come out from the guide line.
SYS SET