Battery Wire Connector (R-Ch) - Sony WH-1000XM3 Service Manual

WH-1000XM3
2-3.

BATTERY WIRE CONNECTOR (R-ch)

7 ornament (R) assy block
Press.
battery wire
SUB board
battery wire
SUB board
11
5 Peel off the adhesion of
the escutcheon cushion.
terminal side
6 Draw the flexible flat cable
(22 core) out of the
connector (CN802).
Turn over.
housing block
(R-ch)
8 Remove the battery
wire connector (CN851)
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
OK
Insert straight into
the interior.
connector
connector
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
– R-ch –
housing block (R-ch)
4 screw
4 three screws
(P2 10)
1 Peel the cover stopper
adhesive off of the
housing block (R-ch).
2 cover stopper adhesive
Note: When installing the screen (R), be careful that it does not
obstruct the acoustic hole of housing block (R-ch).
screen (R)
housing block (R-ch)
NG
Insert only part way. Insert at a slant.
connector
connector
connector
Sony CONFIDENTIAL
For Authorized Servicer
NG
Insert at a slant.
flexible flat
cable
colored line
connector
(P2 10)
1 Peel the cover stopper adhesive
off of the housing block (R-ch).
2 cover stopper adhesive
3 screen (R)
acoustic
hole
NG
connector
SYS SET