Sub Board-4 (R-Ch) - Sony WH-1000XM3 Service Manual

WH-1000XM3

2-10. SUB BOARD-4 (R-ch)

– R-ch –
rib
17
1 Draw the flexible flat cable
(14 core) out of the
connector (CN803).
The opposite side is
the terminal side.
3 Lift up the SUB board in
the direction of the arrow.
Note 1: When installing the SUB board, insert the end of SUB
rib
relay cable
boss
4
boss
How to install the flexible flat cable
When installing the flexible flat cable,
ensure that the colored line is parallel
to the connector after insertion.
2 tapping screw
(P2)
(L = 5.0 mm)
board to between the under of rib and the relay cable.
hole
hole
5 SUB board
Note 2: When installing the SUB board,
align the two bosses and two holes.
Sony CONFIDENTIAL
For Authorized Servicer
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
NG
Insert at a slant.
flexible flat
cable
colored line
connector
SUB board
SYS SET