Lithium Ion Storage Battery (R-Ch) - Sony WH-1000XM3 Service Manual

WH-1000XM3
2-6.

LITHIUM ION STORAGE BATTERY (R-ch)

Note 1: When removing the cushion (BATT) and NTC thermistor from the lithium ion
storage battery, be careful so that the lithium ion storage battery is never damaged
Note 2: When removing the lithium ion storage battery, the lithium ion storage battery
cannot be reused. Be sure to replace it with a new part.
Also, when replacing the lithium ion storage battery, refer to "CHECKING THE
NEW LITHIUM ION STORAGE BATTERY FOR BEFORE USE AND NOTES
ON HANDLING" on page 4.
NTC thermistor
2 Lift up the NTC thermistor in
the direction of the arrow.
(See Note 1)
5 Lift up the lithium ion storage battery
in the direction of the arrow.
OK
No folding on the
battery adhesive.
battery adhesive
13
– R-ch –
1 cushion (BATT)
(See Note 1)
4 Lift up the lithium ion storage battery
in the direction of the arrow.
Battery adhesive is folded.
battery adhesive
Note 3: There are two types of the lithium ion storage bat-
tery for except CH, but the repair parts of the lithi-
um ion storage battery is one type.
For details, refer to "ABOUT THE TYPE OF THE
LITHIUM ION STORAGE BATTERY (Except
CH)" on page 4.
battery wire
6 Lift up the lithium ion storage battery
in the direction of the arrow.
7 Peel the lithium ion storage
battery off of the battery adhesive.
9 lithium ion storage battery
(See Note 2, 3)
Sony CONFIDENTIAL
For Authorized Servicer
claw
3 Remove the battery
wire from the claw.
8
battery adhesive
SYS SET