Sub R Board-1 (R-Ch) - Sony WH-1000XM4 Service Manual

WH-1000XM4
2-9.

SUB R BOARD-1 (R-ch)

• Continued on 2-10 (page 33).
– R-ch –
1 Remove the relay cable
from the two ribs.
(See Fig. C)
Attach in order from 1 to 3.
1 Insert the connector gently.
(The [blue] wire is "B" mark side)
SUB R board
NG
Connector
cracked.
32
relay cable
2 Draw the relay cable connector out
of the connector in SUB R board.
(See Fig. B)
Note: Pull out the connector vertically so that the connector
rib
rib
2 Press in the connector
vertically.
"B" mark
[blue]
NG
Cable is
detached.
does not get damaged or get detached from the relay
cable with connector. Also, do not hold and pull by the
cable because the cable may detach from the connector.
SUB R board
3 Press the relay cable into the gap
between the wall and two ribs.
relay cable
Arrange the relay cable wires on the rib top.
relay cable
relay cable connector
Sony CONFIDENTIAL
For Authorized Servicer
wall
rib
rib
NG
rib
SYS SET