Dynamic Rhino Conversion Manual page 11

Adapting DS112K to DS120
To adapt a DS112K loom to a DS120 loom,
use the DS120 MTR/PB ADAPT LOOM (part
no., GLM51983). This is suitable for motor
looms using Dynamic Controls GCN51315
housing.
For more information, see the
Installation Manual,
R 2
HINO
section 3.5 & 3.6
GLM51983: Fit to existing motor loom
connector
Note:
The
DS52K, DS72K and DS112K do not require a battery adaptor loom.
existing scooter battery connector directly into the R
Rhino to RHINO2 Conversion Guide
GLM51983: Fit to R 2 motor connector socket
HINO
GLM51983: Fit to R 2 park brake connector socket
HINO
2 controller's battery connector.
HINO
Simply connect the
Page 11