Page 1
Phillips screwdriver from those supplied. use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3
Attach 2 x supports (T) to panels [9] and [10] and secure with 4 x screws (E). Tighten with a screwdriver. Attach 2 x beams (U) to 2 x supports (T) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4
Attach 3 x rails (M) to panel [9] and secure with 9 x screws (E). Tighten Attach 3 x rails (M) to panel [10] and secure with 9 x screws (E). with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5
Attach panels [2], [9], [10] and [3] to panel [1] and secure with 8 x Slide 3 x panels [4] into the assembled frame as shown. locking nuts (C). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 6
[2], [9], [10] and [3] and secure with 8 x screws (B). Tighten with Tighten with an Allen Key (R). Attach 1 x foot (S) to panel [7]. a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 7
Attach 12 x braces (K) to back of assembled frame as shown and x screws (F). Tighten with a screwdriver. secure with 12 x screws (L). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 8
Insert 8 x guides (W) into assembled frame as shown. Slide 2 x panel Attach 2 x hinges (Y) to panel [11] and secure with 4 x screws (E). [8] into position Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 9
Attach panel [11] to assembled frame and secure with 8 x screws (E). Attach panel [11] to assembled frame and secure with 8 x screws (E). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 10
[16] and secure with 2 x screws (P). Attach panel [16] to assembled and [13] to panel [14] and secure with 4 x screws (B). Tighten with a frame and secure with 4 x locking nuts (C). Tighten with a screwdriver. screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 11
Slide assembled drawers into position as shown. Attach 2 x wall straps (J) to back of assembled frame and secure with 2 x washers (H) and 2 x screws (L). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 12
(J). Fasten to the wall using 1x wall anchor (I), 1x screw (B) and 1 x washer (H). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Savannah Buffet and is the answer not in the manual?
Questions and answers