Download Print this page

Advertisement

Quick Links

Mischa Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
dowel
screw
bolt
x12
x20
x24
K
J
L
small bolt
wedge
screw
x16
x8
x8
S
T
U
long bolt
screw
timber
x4
x8
screw x28
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
F
small
slide rail
locking
screw x32
x3
nut x24
M
N
O
long
handle
handle
scerw x8
bolt x10
x5
A1
A2
magnetic
magnetic
bar x2
x2
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
H
I
slide rail
slide rail
slide rail
x3
x3
x3
P
Q
R
felt
leg
Allen key
pad x4
bracket x4
x1
A3
A4
A5
hinge
shelf plug
height
x4
x8
adjuster
x2
V
W
X
wall
safety
screw
anchor
strap
x2
x2
x2
Wall Strap
Y
Z
wall
washer
screw
x4
x2
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Mischa Buffet and is the answer not in the manual?

Questions and answers

Summary of Contents for Mocka Mischa Buffet

  • Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 2 Attach 2x magnetic (A1) to panel [1] and secure with 4x timber Tighten with a screwdriver. Insert 4x bolts (C) into panels [5] and [6]. screw (U). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 3 Attach panels [3], [4], [5] and [6] to panel [1] and secure with 8x locking nuts (D) 4x locking nuts (D) and 4x dowels (A). Tighten with a screwdriver. and 8x dowels (A). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 4 Attach panel [2] to the rest of the unit using 8x dowels (A). form the back of the unit. Secure with 8x long screws (M) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 5 (R). Attach 4x felt pads (P) to the ends of the legs.Attach 2x support Tighten with a screwdriver. legs [10] to panel [2] as shown. Screw the height adjusters (A5) onto the support legs [10]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 6 Insert 8x shelf plugs (A4) into the unit at the desired height for the (U). Tighten with a screwdriver. Ensure the doors open and close easily. shelves and rest the shelf panels [13] onto them. Ensure the shelves are balanced and stable. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 7 Insert 12x bolts (C) into panels [14]. Tighten with a screwdriver. Attach panels [15] and [16] to panel [14] and secure with 12x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 8 Slide panel [17] along the grooves between the panels [15] Attach panels [15], [16] and [18] as shown using 12x screws (B). and [16] to form the base of the drawer. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 9 Attach 3x handles (O) to panels [14] and secure with 6x handle bolts (N). as shown. Secure with 12x screws (E) and tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 10 8x screws (L). Tighten with a screwdriver.Attach 2x safety straps (V) to the top of the back side of the unit as shown using 2x washers (Z) and 2x screws (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 11 (V). Fasten to wall using 2x washers (Z), 2x wall anchors (X) and 2x wall screws (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...