NB-IoT Module Series
BC66-NA-TE-B User Guide
3
Operation Procedures
This chapter mainly illustrates the operation procedures of BC66-NA-TE-B. BC66-NA-TE-B can be used
alone to upgrade firmware and debug applications based on BC66-NA module. Also, it can be used in
conjunction with an STM32 Nucleo-64 development board via Arduino interface to develop NB-IoT
applications based on STM32. The following describes the operation procedures of BC66-NA-TE-B in
different operation modes.
3.1. Operation Procedure with Single Board
This chapter elaborates the operation procedure of using the BC66-NA-TE-B alone.
BC66-NA-TE-B_User_Guide
14 / 27