Table of Contents
Advertisement
5
Operation Procedures Illustration
This chapter introduces how to use the Smart EVB G2 for testing and evaluating Quectel Smart modules.
5.1.
Power ON Smart Modules
The following are the procedures for powering on the smart modules.
1.
Connect the Smart TE-A to the connectors (J0101 and J0102) on Smart EVB G2.
2.
If battery power supply mode is selected, install a Li-polymer battery on J0202 and then switch
S0201 to BATTERY state. If 5.0V DC power supply mode is selected, switch S0201 to DC POWER
state.
3.
Switch S0202 to ON state, and then D0501 will be lighted.
4.
Press D0501 (PWRKEY) for at least 2s to turn on the module. When the following interface is
displayed on the utilized LCD(s), it means the booting has been completed.
Smart_EVB_G2_User_Guide
Figure 48: LCD Display Indicating Module's Power-on
Smart LTE Module Series
Smart EVB G2 User Guide
52 / 59
Advertisement
Table of Contents
