Operation Procedures; Operation Procedures With Single Board; Interface Diagram Of Using Bc95-Te-B Alone - Quectel BC95-TE-B User Manual

NB-IoT Module Series
BC95-TE-B User Guide
3

Operation Procedures

This chapter mainly illustrates the operation procedures of BC95-TE-B. BC95-TE-B can be used alone to
upgrade and debug NB-IoT applications based on BC95-TE-B. Meanwhile, it can also be used in
conjunction with an STM32 Nucleo-64 development board via Arduino interface to develop NB-IoT
applications based on STM32. The following part describes the two ways of using BC95-TE-B in detail.

3.1. Operation Procedures with Single Board

This section elaborates the operation procedures of using the BC95-TE-B alone.

3.1.1. Interface Diagram of Using BC95-TE-B Alone

S201
J208
J203
J209
J203
Figure 4: Interface Diagram of Using BC95-TE-B Alone
BC95-TE-B_User_Guide Confidential / Released 12 / 22