CALL COMPLETION FOR LOCAL EXTENSIONS
CONFIGURATION
1. On UCM6100 web GUI->PBX->Basic/Call Routes->Extensions page, create or edit an extension
(e.g., 1000) to bring up the dialog in below figure.
2. Click on "Features" tab and make sure the following are configured:
"Enable CC": selected
"CC Mode": set to "Normal"
3. Configure the above steps to another extension 1001 if extension 1001 is the party that will be on the
call with extension 1000.
Figure 1: Enable Call Completion for Extensions
UCM6100 Busy Camp-on Guide
Page 3 of 10