Connect To Internet And Cloud - Smappee Pro Installation Manual

Connect to Internet and Cloud

Overview
Now, you need to connect your Smappee Pro to your account on the App/Smappee
cloud. If you use Wi-Fi for the network connection, you also provide here the Wi-Fi
network name (SSID) and Wi-Fi password.
The installation process is largely guided by the Smappee App. You should follow the
instructions on the screen.
Check Before You Start
Please do a final check:
ID Check
1. Your Smappee Pro is powered on. (It will take about 3
minutes.)
2. Your Smappee Pro is showing a Green Steady (Ethernet,
3G/4G dongle) or Blue Flashing (Wi-Fi) light.
3. Your App is installed on your smartphone.
4. In the App, you are logged in with the correct user name and,
if applicable, at the correct service location.
Starting the Installation in the App
To start the installation of the Smappee Pro, follow these
steps:
If you see a screen with an Install-Bubble:
1. Click on the "Install" bubble in the home screen.
If you don't see the Install-Bubble, follow these steps, depending on the screen options:
1. Select the menu item "Settings"
2. and/or select "Smappee Energy"
3. and/or "Repeat Smappee installation"
Smappee Pro Installation Manual
Version 1.6.1, 12-05-2017, rev 226
More info
page 15
page 15
page 16
page 16
Page 17 of 32