Figure 3: Gdms Batch Configuration Phone Server - Grandstream Networks UCM63 Series Configuration Manual

Note:
1. When configuring the UCMRC server address to the phone, in order to make UCMRC work
normally, the system will automatically issue the following configuration to the phone:

SIP transport is configured as "TLS".

The STUN server is configured as the address of the UCMRC TURN service.
2. After assigning an account to the phone on the GDMS, if the phone cannot be registered or
there is a problem with the call after registration, please go to the phone to check whether the
configuration is correct in the following section [CONFIGURE UCM REMOTECONNECT
SERVICE FOR IP PHONES].
3. When deleting the phone's UCMRC server account, the system will automatically clear the
phone's STUN server configuration.
4. Terminal devices not supported on GDMS cannot be remotely managed and deployed.
Remote Connect EndPoint Configuration Guide

Figure 3: GDMS batch configuration phone server

UCM630x series
P a g e | 6