Simplex Secos Installation Instructions Operating Instructions page 29

Installation instructions | Operating instructions
Secos - Simplex Energy Control System
10.2. Actuator
Signalling
Status LED: The module has a two-colour
LED red / green to signal operating states.
1
LED: Operating states Actuator
2 Key to identify the actuators
Status Duration
Off -
Green Flashing
Red Flashing
Red Permanent
36
Actuator
Information
Condition good
Valve in motion
Warning, see chapter on Fault-finding / Troubleshooting
Error, see chapter on Fault-finding / Troubleshooting
EN
1
2
The illustrations are symbolic and may deviate from the respective product.
Product range
Subject to technical modifications and errors.
29