Operation - Simplex Secos Installation Instructions Operating Instructions

Installation instructions | Operating instructions
Secos - Simplex Energy Control System
10.

Operation

10.1. Energy saving controller
The Flamconnect app is essential for
setting functions and calling up detailed
information on the individual operating
states.
Signalling
Status LED:
The energy saving controller contains
a status LED to signal operating states.
Status LED: The energy saving controller contains a status LED to signal operating states.
Model: Two-colour LED red / green.
Status Duration
Green Permanent
Green Flashing
Off Off
Red Flashing
Red Permanent
28 Secos - Simplex Energy Control System
34
Flamconnect app
35
Energy saving controller
Information
Ready for operation OK
Commissioning required
Not ready for operation
LED is off, e.g. if commissioning has not been completed.
Warning, see chapter on Troubleshooting, LED flashes red 1 x per second
Error, see chapter on Fault-finding / Troubleshooting
EN
1 Status LED