Table of Contents
Advertisement
GENERAL
Check oil level in all gearboxes before operation. Refer to the Maintenance Section of
this manual for recommended oil type and viscosity.
Lubricate all grease fittings. Refer to the grease schedule of this manual.
Check that all nuts and bolts are in place and properly tightened. Refer to the Maintenance Section of this
manual for required bolt grades and torques.
Check that all tires are inflated to proper specifications. Refer to the Maintenance Section of this manual for
required tire pressures. Asm-0001
CHAIN GUARDS
Insert the chain link into the first slot of the chain rail
and slide the galvanized rod through the link.
Continue along the chain rail until all links are
inserted.
Bend the last 2" (51mm) of the galvanized rod back
to keep the chains from falling through the slots.
For single chain configurations, insert the end link
into the slot. For double chain configurations, insert
the middle link into the slot.
FX-742 07/16
© 2016 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-2
Advertisement
Table of Contents
