Add The Sensor - HunterLab ColorFlex EZ Supplemental Manual

iii. Option #3: Sentinel Key
a. If the user has a HunterLab USB hardware key, then it can be used with a new
iv. Option #4: 30-day trial
a. Fill out the registration form provided for the 30-day trial. Connect to the

Add the Sensor

1. Upon initial startup, the following message will be displayed: 'Sensor not yet installed.
Please install a sensor to take measurements'. This message will remain until you
proceed to the Sensor Menu > Install > Configure command and install a new sensor.
2. The Sensor Manager appears first:
3. Select Add Sensor to install a new sensor. The Setup Sensor screen allows selection of
the instrument model and the communications port. Select Next when ready.
10
ColorFlex EZ Supplemental Manual for EasyMatch QC
sensor on the same computer. Return to Install, Step 5 (Figure 3) and select the
Sentinel Key to continue.
internet. HunterLab will approve the trial and email the SoftKey license back.
Follow the directions for Option #1 or #2 to complete.
Figure 7. Request 30-day Trial
Figure 8. Sensor Manager