Colorflex Ez Features - HunterLab ColorFlex EZ Supplemental Manual

Hide thumbs Also See for ColorFlex EZ:

Table of Contents

ColorFlex EZ Supplemental Manual for EasyMatch QC

ColorFlex EZ Features

The ColorFlex EZ spectrophotometer is a versatile color measurement instrument that can be used for

reflectance measurement of products in industries such as paint and textiles. Although the instrument

is AC-powered, the small footprint of the ColorFlex EZ allows for portable operation.

Figure 1. ColorFlex EZ

The instrument uses a xenon flash lamp to illuminate the sample. The light reflected from the sample

is then separated into its component wavelengths through a dispersion grating. The relative intensities

of the light at different wavelengths along the visible spectrum (400-700 nm) are then analyzed to

produce numeric results. This is an objective means of quantifying a sample's color.

ColorFlex EZ is available in one geometry – 45° illumination/0° viewing. The label on the back of the

instrument provides information on the serial number.

The ColorFlex EZ may be operated using the keypad and display on the instrument, or operated while

connected to a computer running HunterLab EasyMatch QC software. Having purchased both a

ColorFlex EZ and EasyMatch QC software, you have two sources of information on the instrument in

addition to this User's Manual: the ColorFlex EZ User's Manual which describes stand-alone operation,

and the EasyMatch QC help file, which describes operation of the ColorFlex EZ using the software.

Refer to those information sources as required.

Table of Contents

Do you have a question about the ColorFlex EZ and is the answer not in the manual?