Disposal - Siemens MOTOX Worm Gearbox S BA 2012 Operating Instructions Manual

Disposal

Used oil disposal
Incorrect disposal of used oil is a threat to the environment and health.
After use, oil must be taken to a used oil collection point. The addition of foreign substances
such as solvents, brake and cooling fluid is prohibited.
Avoid prolonged contact with the skin.
Empty the used oil from the gearbox. The used oil must be collected, stored, transported and
disposed of in accordance with regulations. Do not mix polyglycols with mineral oil. Dispose
of polyglycols separately.
Please observe country-specific laws. Under German law, to allow optimal treatment of the
oil (§4 VI Used Oil), oils with different disposal codes must not be mixed with one another.
Collect and dispose of used oil in accordance with regulations.
Remove oil spillages immediately with an oil-binding agent in compliance with environmental
requirements.
Dispose of the housing parts, motor parts, gear wheels, shafts and roller bearings of the
geared motor as scrap metal.
Dispose of packaging material in accordance with regulations.
Table 9- 1
Type of oil
Polyglycols
BA 2012
Operating Instructions, 02/2018, A5E38093971A/RS-AB
WARNING
Disposal codes for gear oils
Designation
CLP ISO PG VG460,
CLP ISO PAO VG22,
CLP ISO H1 VG460
Disposal code
13 02 08
9
39