Table of Contents
Advertisement
NOTICE
Damage to the rubber elements caused by solvent
Solvents, oils, greases, and fuels damage rubber elements.
Avoid contact at all times.
Figure 4-7
The torque arm can be fitted in various positions, depending on the hole circle pitch.
Figure 4-8
For a toggle lever design, derive the force in the range of 90° ±20°.
Procedure
1. Clean the contact surfaces between the housing and the torque arm.
2. Tighten the M6 screws to 10 Nm torque.
You have now mounted the torque arm.
BA 2012
Operating Instructions, 02/2018, A5E38093971A/RS-AB
Attaching the torque arm
Toggle lever design
4.10 Torque arms with shaft-mounted gearboxes
Installation
27
Advertisement
Table of Contents
