Table of Contents
Advertisement
Explanations
12.1
Declaration of Incorporation
Document No. A5E37802169AB
Declaration of Incorporation according to Directive 2006/42/EC Annex II 1 B.
Manufacturer:
Address:
Product designation:
The designated product is an incomplete machine in the sense of Article 2 g of
Directive 2006/42/EC. It is designed exclusively for incorporation into another machine or for
assembly with one or more other machines.
The following essential safety and health requirements of Directive 2006/42/EC, Annex I, are
applied for the incomplete machine specified above and are complied with. The risks not
relevant for the product are not listed.
1.1.1, 1.1.2, 1.1.3, 1.1.5
•
1.4.1, 1.4.2, 1.4.2.1
•
1.6.1, 1.6.2
•
When developing and manufacturing the above designated product, the following standards
and specifications were applied: EN ISO 12100-1: 2011
The special technical documents according to Annex VII, B of the Directive 2006/42/EC were
generated and will be provided to the appropriate authorities when justifiably requested in an
electronic form.
The named person for compiling the technical documents:
Georg Böing, Head of Research & Development
Before the final product is commissioned, in which the incomplete machine described here is
to be incorporated, it must be ensured that this is in conformance with Directive 2006/42/EC.
Tübingen, July 1, 2017
Georg Böing
Head of Research & Development
BA 2012
Operating Instructions, 02/2018, A5E38093971A/RS-AB
Siemens AG
Division Digital Factory DF MC
Bahnhofstraße 40, 72072 Tübingen, Germany
MOTOX gearboxes with input units A, K, P
• Worm gearboxes S.08, S.18, S.28
• 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.8.1
1.2.4.4, 1.2.6
•
1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.5.15
•
1.7.1, 1.7.1.1, 1.7.2, 1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3
•
Florian Hanisch
Vice President Lead Factory Simogear
12
47
Advertisement
Table of Contents
