Table of Contents
Advertisement
Manual URYXXON
3.4. Setting up the instrument
Place the instrument on a hard, even surface where humidity and temperature
are fairly constant. Make sure that the instrument is allowed to acclimate to room
temperature prior to use.
Make sure that you
• Do not place the instrument near strong electromagnetic fields
• Do not place the instrument near heating plates, ovens or radiators
• Do not expose the instrument to strong light sources (i.e. direct sunlight)
3.5. Description of instrument parts
Pic. 7: Front view
Actuator
1. Touch-Screen
2. Test Strip Slide
3. Printer Flap
4. Serial Interface
5. USB - Interface
6. USB - Interface
7. Mains Connection
8. On/Off Switch (I/O)
9. LAN-Interface
1
We recommend to use shielded cables.
2
We recommend to make use of the hand scanner from MACHEREY-NAGEL
ATTENTION:
Do only connect the intended devices to the corresponding interface. If you
connect another device to the corresponding interface, the analyzer or the
connected device may be damaged. Check all cables prior to use and verify
the proper connection.
72
®
Relax
Function
Control of equipment functions
Test strip retainer and autonomous start of analysis
Opening the printer flap for paper replacement
Connection of a computer (cable length
Connection of a computer (cable length
Connection of a keyboard or a bar code scanner
Contact for the provided power pack
Turning the equipment on and off
Connection to network (serial over LAN)
Manual URYXXON
g
f e
i
Pic. 8: Backside view
1
max. 3 m)
1
max. 3 m)
®
Relax EN, V5.00 / 04.19
d
2
Advertisement
Table of Contents
