Setup; Unpacking The Instrument; Operation With Batteries; Operation With Battery Pack - Macherey-Nagel PF-12 Manual

Compact

Hide thumbs Also See for PF-12:

Table of Contents

Available languages

4. Setup

Take the instrument out of the box and check for damage that may have been

caused during shipment. Please check if any parts listed in the package con-

tent are missing. If parts are missing or damaged, contact MACHEREY-NAGEL

or your responsible distributor.

The PF-12 photometer runs on 4 AA alkali-manganese batteries (included in de-

livery). Rechargeable batteries, e.g. 4 Compit NiMH AA 2500 mAh can be used

in the instrument and are available as accessories (REF 919 221). The charger

and rechargeable batteries need to be ordered separately.

When changing batteries, we recommend to always exchanging the entire set.

The battery compartment is at the bottom of the instrument. To change the bat-

teries,

1. Turn the instrument around and place it on a soft surface.

2. Unscrew the screws of the battery compartment and take of the lid

3. Insert the 4 batteries in the respective slots. Make sure polarity of batteries

and slots match.

4. Put the lid back on, tighten the screws and turn the instrument around.

Only remove the battery compartment when changing batteries!

The PF-12 can be equipped with an internal battery pack, which can be charged

via the USB port. You can order such a power pack separately and insert it into

the instrument (as of SN: NPF121600). Detailed installation instructions come

with the battery pack.

Table of Contents

Table of Contents