Technical Specifications; Limited Warranty - JVC MultiDyne FS-900 User Manual

19

TECHNICAL SPECIFICATIONS

Technical Specifications
SDI Video
Interface SMPTE ST259, ST292, ST424
Data Rate 270Mbps, 1.5Gbps, 3Gbps
Input/output Level 800mVp-p
Input/output Impedance 75 Ohms
Connector, Camera Unit BNC,
Connector, Base Unit BNC
Embedded Audio Supported Yes
Video Genlock (Reference)
Type Analog Black Burst, Tri-Level
Impedance 75 Ohms
Level 1Vp-p
Connector, Camera Unit Internal 68-pin
Connector, Base Unit BNC
Analog Audio
Type Balanced Analog Line-Level
Level +4dBu nominal, +24dBu max.
Input Impedance > 10k ohms
Output Impedance 50 ohms
THD+N Better than 0.1%
Frequency Response +0.1 dB/-3dB, 20Hz to 20kHz
Connector, Camera Unit DB9
Connector, Base Unit DB25
Intercom Audio
Number of Channels 2
Interface 2-Wire or 4-Wire
Compatibility RTS, Clear-Com
Headset MIC Type Dynamic
Headset MIC Impedance 200 Ohms nominal
Level, 4-Wire +4dBu nominal, +24dBu max.
Level, 2-Wire -10dBu nominal
Connector, Headset XLR-5
Connector, Base Unit DB25
Instruction Manual, FS-900
Camera Remote Control
RCP Camera Control
(Remote)
Type JVC RCP (RS232)
Connector, Camera Unit Internal 68-pin
Connector, Base Unit 6 pin Mini-DIN
Ethernet
Ethernet
Data Rates 10/100/1000 Base-T
Connector RJ45 Cat5e
Tally / GPIO
Input type Short to GND or TTL Low to Activate
Output Type Relay Contact Closure (30V, 2A max)
Connector, Camera Unit DB15
Connector, Base Unit DB25
Timecode
Type SMPTE/EBU LTC
Inputs Unbalanced, 15Vp-p max
Outputs Unbalanced, 3Vp-p max
Connector, Camera Unit Internal
Connector, Base Unit BNC
Electro-Optical
Operating Wavelengths 1471-1611nm
TX Laser Output Power 0dBm (Class 1 Laser)
Receiver Sensitivity -20dBm
Fiber Compatibility Single-mode
Optical Connector Types opticalCON DUO, SMPTE 304M
Power Supply
Power Input, Base IEC320, Universal Input, 90-250VAC, 50-60Hz
Power Input, Camera:
Remote Power Hybrid Fiber Connector, 54 VDC
Local Power Battery Mount (Anton Bauer or V-Mount), 11-17
VDC
Environmental
Operating Temperature 0 to 50°C
Operating Temperature 0 to 95% RH, non-condensing.
Instruction Manual, FS-900
FS-900 Triple Studio Camera Interface System is manufactured, warranted and supported by MultiDyne Video and Fiber Optic Systems, and
distributed in North America by JVCKENWOOD USA Corporation. It has two years warranty for Parts and Labor from date of invoice.
Please review additional warranty terms at www.multidyne.com located in terms of sale. A hard copy will be provided promptly and free of
charge upon request.
To obtain service or for further information, please contact:
MultiDyne Electronics Inc.,
10 Newton Place,
Hauppauge, NY 11788
Toll free: 877-685-8439
Tel: 516-671-7278
E-mail: sales@multidyne.com
Website: www.multidyne.com
EU JVC Service Contacts
Importer (EU only)
JVCKENWOOD U.K. Limited
12 Priestley Way, London NW2 7BA, UNITED KINGDOM
Importeur (Nur EU)
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, DEUTSCHLAND
Importatore (Solo EU)
JVCKENWOOD Italia S.p.A.
Via G. Sirtori 7/9, 20129 Milano, ITALIA
Importeur (Alleen EU)
JVCKENWOOD Belgium N.V.
Leuvensesteenweg 248J, 1800 Vilvoorde, BELGIQUE
Importeur (Alleen EU)
JVCKENWOOD Europe B.V.
Amsterdamseweg 37, 1422 AC Uithoorn, NEDERLAND
Importateur (UE uniquement)
JVCKENWOOD Europe B.V. Succursale France
7 Allée des Barbanniers CS10033 92632 GENNEVILLIERS CEDEX
FS-900 Triple Studio Camera Interface System is manufactured, warranted and supported by MultiDyne Video and Fiber
Optic Systems, and distributed in North America by JVCKENWOOD USA Corporation. It has two years warranty for Parts and
Labor from date of invoice.

LIMITED WARRANTY

Limited Warranty
20