Camera Interface Signal Paths - Jvc Multidyne Fs-900 User Manual

5

CAMERA INTERFACE SIGNAL PATHS

CAMERA INTERFACE SIGNAL PATHS
3Gb/s HD-SDI PGM return 1 (video)
Prompter: SDI → HDMI (common)
Analog SD/HD reference (common)
RS232/422/TTL Data 1 (camera control)
3Gb/s HD-SDI PGM return 1 (video)
Prompter: SDI → HDMI (common)
Analog SD/HD Reference (common)
RS232/422/TTL Data 2 (camera control)
3Gb/s HD-SDI PGM return (video 1)
Prompter: SDI → HDMI (common)
Analog SD/HD Reference (common)
RS232/422/TTL Data 3 (camera control)
Instruction Manual, FS-900
3Gb/s HD-SDI 1 (camera video)
3Gb/s HD-SDI return 2 (video)
2 channel Intercom
2 channel PGM audio
Camera 1 Tally (R,G)
Timecode
Ethernet 10/100/1000
3Gb/s HD-SDI 2 (camera video)
3Gb/s HD-SDI return 2 (video)
2 channel Intercom
2 channel PGM audio
Camera 2 Tally (R,G)
Timecode
Ethernet 10/100/1000
3Gb/s HD-SDI (camera video 3)
3Gb/s HD-SDI return (video 2)
2 channel Intercom
2 channel PGM Audio
Camera 3 Tally (R,G)
Timecode
Ethernet 10/100/1000
Instruction Manual, FS-900
CAMERA UNIT - CONNECTORS
Battery Connector:
Anton Bauer Gold mount or V mount
Fiber-Optic Connector:
Use either SMPTE or Neutrik cable (depending on option
ordered) to connect to Base Unit.
Return 3 Video—HDMI Output Connector:
The Return 3 video channel sent from the Base Unit to the
Camera Head that has been converted from SDI to HDMI
inside the Camera Head Unit is output on this HDMI connector.
Viewfinder Video—BNC Output Connector:
The video output on this connector is either the SDI video
coming in from the Camera or the Return 1 video channel sent
from the Base Unit depending on which input is selected via
the Viewfinder Input Select Button (see page 7 for location).
CAMERA UNIT - CONNECTORS
Return 1, 2, 3 Video—BNC Output Connector:
The Return video channel input into and sent from the Base
Unit to the Camera Head is output on these BNC connector.
Auxiliary Power Output 1 2 & 3 Connectors: In order to use
4A from each connector, all pins must be used.
Program Audio Output Connector:
See page 16 for detailed pinout assignments.
External Tally/GPIO Connector:
See page 16 for detailed pinout assignments.
Ethernet Connector:
Use to connect Camera Head Unit to Ethernet.
Intercom Headset Connector:
See page 17 for detailed pinout assignments.
6