Hand-held Spray Gun Dekor
Fig. 10: Changing the seals
7.
Remove seals ( Fig. 10/1) from main element.
Installation
1.
WARNING!
Risk of injury through the use of incorrect spare parts!
Insert new seals into the main element.
2.
Screw in sealing screw with a suitable screw driver.
3.
Place the cover clamp onto the main element.
4.
Carefully insert fluid needle.
5.
Insert needle spring and screw in tension spring screw into the main element.
6.
Tighten locking piece.
200-0203 ■ 200-0204 ■ 200-0127 ■ 200-0128
ENGLISH
GB–33