Krautzberger 200-0203 Operating Instructions Manual page 30

Fig. 7: Retighten the sealing screw
1. Remove the cover clamp ( Fig. 7/1) from the main element.
2. Lightly retighten sealing screw ( Fig. 7/2) with a suitable screw driver.
If the leak is not remedied by adjusting the sealing screw, the sealing set must be
replaced (
3. Place the cover clamp ( Fig. 7/1) onto the main element.
GB–30
Operating instructions
Ä Chapter 8.6 'Changing the seal package' on page 31).
T-Dok-242-GB-Rev.0
mail@krautzberger.com, www.krautzberger.com