RGBlink mini+ User Manual page 40

2. Set both old IP and new IP to the camera IP address you
want to control,the corresponding communication port to
1259 on mini+, configuration path: M(Menu) → FX → PTZ
Camera Setting Port on the control software of mini+.
3. After IP address setting,turn on "Enable" and you can
control PTZ camera.
You can click and
focus.Turn on "Auto",the camera will zoom and focus
automatically.
You can slide
You can also slide
Click to set camera's rotation position.
mini+
to set camera to zoom and
to set brightness.
to set Pan/Tilt speed of camera.
User Manual
40