RGBlink mini+ User Manual page 21

3.2.2 MODE
Push S button twice to enter <MODE>menu,and rotate 「Y」knob to select FAST or T-BAR
After selecting Quick Cut, you need to select the switching time: from 0.5s to 5.0s.
The steps are as follows.
1.Press the "S" button twice to enter the
mode interface.
2. Press the 「Y」 knob and wait for the option
to turn yellow.3. Turn the 「 Y 」 knob to
change the parameters.
Note: In T-Bar mode, you can directly control the progress of the T-Bar manually and customize the
switching.
mini+
Mode include Fast and T-Bar
3.Press the 「Y」knob to confirm.
User Manual
21