RGBlink mini+ User Manual page 17

3.1.5 LOGO Overlay
1.Push MENU,rotate and push
enter the fifth menu item<LOGO OVERLAY>
Note：
If It is your first time to use the logo overlay function, please refer to 3.4.2 Using XPOSE mini first.
3.1.6 IP Setting
Push MENU,rotate and push 「Y」 knob to enter the
sixth menu item<IP SETTING>
SET IP Address Manually
Select each segment with the「Y」knob, then
press to enter and set the value of each segment
by pressing the knob again.
Note: After setting IP address manually, please restart the device.
mini+
「Y」 knob to
User Manual
2.Rotate 「Y」 knob and select ON/OFF
ENABLE and set the position of LOGO
Set IP Address Automatically
Use this setting if your network/router has a D
HCP server
Select DHCP and set to ON,manual setting is di
sabled, and the IP Address for mini+ is set fro
m the network.
17