Test Your Connection To Hp Cloud - HP Jet Fusion 4200 Product Documentation Site Preparation Manual

Build Manager
HP SmartStream 3D Build Manager is separate software that, unlike HP SmartStream 3D Command Center
(which helps you to monitor your printers), allows you to prepare and submit your jobs to the printer. The
computer that runs this software must have a direct network connection with the printer and with the computer
running HP SmartStream 3D Command Center Server, and must meet the following requirements:
Minimum: Intel Core i5, 16 GB RAM, 2 GB dedicated graphics card with DirectX 11 support
●
● Recommended: Intel Core i7, 64 GB RAM, 4 GB dedicated graphics card with DirectX
IMPORTANT:
If you are planning to run non-HP software, make sure your computer complies with its requirements and that it
is installed before the agreed date of printer installation.

Test your connection to HP Cloud

You are responsible for testing your network before the day of installation to check your connection to the HP
Cloud from the computer running Command Center Server.
IMPORTANT:
Center – Installation and troubleshooting guide, which you can download from
SmartStream3DCommandCenter/manuals.
Process overview
1. Download HP SmartStream 3D Command Center Server to the designated computer that will be connected
to the HP Cloud 24/7.
2. Install HP SmartStream 3D Command Center Client in the same computer and in any other computer in the
same network on which you intend to use the software.
3. Sign in to your HP 3D Center by PrintOS account.
4. Add the Command Center Server app to your HP 3D Center by PrintOS account.
Server installation
1. Download the latest version of HP SmartStream 3D Command Center Server from
SmartStream3DCommandCenter/software.
2. Ensure that this computer will run 24/7 by disabling all policies that could lead the computer to switch to
sleep or standby mode.
3. Install the HP SmartStream 3D Command Center Server into the computer you have selected to be the
server of the system, meeting the requirements explained in
on page
ENWW
Running Build Manager in a virtual environment is not supported.
If you have any doubts or problems during this procedure, see the HP SmartStream 3D Command
40. Restart when required.
www.hp.com/go/
www.hp.com/go/
Command Center Server computer
Test your connection to HP Cloud 41