HP Jet Fusion 4200 Product Documentation Site Preparation Manual page 55

Table of Contents

Advertisement

Electrical installation
Has the site been prepared to supply power to the printer?
Configuration 1 branch circuit breaker: 4 poles, 32/40 A
Configuration 2 branch circuit breaker: 3 poles, 50/60 A
Has the site been prepared to supply power to the processing station?
Configuration 1 branch circuit breaker: 2 poles, 25 A, type J
Configuration 2 branch circuit breaker: 2 poles, 20 A, type J
Is the chosen power system within its nominal range?
Is the grounding conductor properly installed, as shown in the site preparation
guide?
Have you booked the services of a certified electrician for the first two days of
installation? (May be required on the first or second day.)
Is the electrician aware of all requirements and specifications highlighted in this
document?
Is the Power Distribution Unit (PDU) correctly installed?
Are Residual-Current Circuit Breakers (RCCB), also known as Ground Fault Circuit
Interrupters (GFCI), required by local laws? if so, have they a sensitivity of 100 mA
or higher?
Electrical configuration
No power cords are supplied with the printer/processing station; does the
electrician understand that power cord(s) must be provided according to
equipment specifications and local laws?
If local regulations specify that you must use electrical plugs to connect the
printer/processing station to the power supply, does the electrician have the
required plugs ready for installation?
If you are using a UPS, does it follow the requirements in the site preparation
guide? See
How to select an external power supply on page
Networking requirements
Have network connections been supplied?
Do you have a LAN cable long enough to connect the printer and the processing
station to the network?
Do you have a computer in which we can install the HP SmartStream Command
Center?
Will the above computer be permanently connected to the Internet and
permanently powered on?
Have you installed the HP SmartStream Command Center Software in one
computer and tested the connection to the HP Cloud as specified in this guide?
ENWW
Yes
Yes
20.
Yes
No
Comments
(Required)
(Required)
(Required)
(Required)
(Required)
(Required)
(Required)
No
Comments
(Required)
(Required)
No
Comments
(Required)
(Required)
(Required)
(Required)
(Required)
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jet fusion 4210

Table of Contents