Site Preparation Requirements For The Printer; Physical Space Requirements - HP Jet Fusion 4200 Product Documentation Site Preparation Manual

2

Site preparation requirements for the printer

Physical space requirements

Unloading route
The printer is commonly delivered by truck. The reception area and the entrance to the site should be
unobstructed and ready to receive delivery.
The route between the unloading area of the printer and the installation site, including any corridors and
doorways through which the printer must be transported, is important to proper site preparation and must be
planned before the arrival of the printer. This pathway must be clear when the printer arrives.
Printer physical specifications with packaging
Width with packaging
Depth with packaging
Height with packaging
Weight with packaging
For the specifications without packaging, see
production area on page
Doorway specifications
Minimum doorway width
Minimum doorway height
Minimum corridor width with right-angled bend
The printer can be moved on the pallet up or down a ramp of no more than 10° inclination.
Unpacking and moving the printer
You are strongly recommended to unpack the printer where it will be used, or as close to that location as
possible.
8 Chapter 2 Site preparation requirements for the printer
2300 mm (90.55 in)
1325 mm (52.17 in)
2068 mm (81.42 in)
945 kg (2083 lb)
Load bearing on page 9
10.
2320 mm (91.34 in) with packaging
1202 mm (47.32 in) without packaging
2088 mm (82.20 in) with packaging
1435 mm (56.50 in) without packaging
1520 mm (59.84 in) without packaging
and Designing the optimal print-
ENWW