HP Jet Fusion 4200 Product Documentation Site Preparation Manual page 23

Branch circuit breaker specifications
Power cable specifications
Configuration
Minimum cross-sectional area
Terminals
External diameter range
Configuration 2: 200–240 V line-to-line three-phase configuration
Printer specifications
Number of power wires)
Input voltage (line to line)
Input frequency
Power consumption (typical)
Maximum load current (per phase)
Branch circuit breaker specifications
Power cable specifications
Configuration
Minimum cross-sectional area
Terminals
External diameter range
Power cables
No power cable is provided with the printer. The cables that you use must meet the minimum specifications for
the chosen configuration explained for each configuration, and must follow local laws. The example below is for
configuration 2.
ENWW
4 poles, 32/40 A
3 lines + N + PE
6 mm² or 10 AWG
Ferrule terminals, except the PE terminal, which uses the M8 ring type
18.0–25.0 mm
3 lines + PE
200–240V (±10%)
50/60 Hz
9–11 kW
48 A (up to 60 A repetitive peak current)
3 poles, 50/60 A
3 lines + PE
10 mm² or 6 AWG
Ferrule terminals, except the PE terminal, which uses the M8 ring type
18.0–25.0 mm
Printer electrical configuration 19