Aethra Vega X3 Use And Installation Manual page 63

Menu options are "Streaming Management", "Enable Streaming" and Activation.
a) "Streaming Management"
This option permits that the parameters "Notice", "Video", "Rate", "Address", "Port" and
"TTL" can be modified by an external application (e.g. from the Web).
If this option is not selected and a unicast IP address is present in the "Address", then only the
system identified by that IP address would be able to view the stream.
•
Enable/Disable "Enable all addresses".
If enabled allows la above parameters modification from every external system.
•
If not enabled, you can define which system or sub-network is enabled to perform such
an operation.
If in the "Address mask" the value is 255.255.255.255, a system is selected; if the value
is 255.255.255.0 the sub-network is selected.
Likewise, if in the field "Address" a unicast type IP address has been set up, the limitation
also effects the visualization of the streaming.
•
Password: allows password protection of streaming management
b) "Enable Streaming"
This option permits the parameters "Notices", "Video", "Rate", "Address", "Port" and "TTL"
to be changed.
Allows stream viewing according to the limitations imposed by the parameters "Streaming
Management" and "Enable all addresses." If this option is not selected, streaming will never be
activated.
"Announcements". This drop-down menu allows you to choose how the System will notify the
user that an external system has requested streaming activation.
Options:
•
Activation: The System will display a dialogue box containing a warning and a video
camera icon that will stay in place as a reminder for as long as streaming is active.
•
Status: Only the video camera icon will be displayed during streaming.
•
Confirmation request: A dialogue box will appear to request confirmation of streaming
activation. This option offers an extra level of protection.
"Video". This drop-down menu allows you to choose which video signal is transmitted when
streaming is active.
If the "Automatic" option is selected, the streaming content will be determined by the status of
the terminal: if the terminal is connected (in either a point-to-point or multipoint session), video
coming from the remote site will be streamed. If the terminal is disconnected, local video will be
streamed.
If the "Local" option is selected, the system will always stream local video.
"Rate". This drop-down menu allows you to choose the bandwidth occupied by audio and video
streaming. Note that if a rate of 64K has been selected, the video will not be transmitted,
because all the bandwidth will be occupied by audio.
63