Aethra Vega X3 Use And Installation Manual page 49

Multi Imagine Type
a. By selecting AUTO a mixed PIP and PaP function is enabled.
By means of remote control "PIP" key you can switch between PIP and PaP.
b. By selecting PIP PIP function is enabled.
c. By selecting PaP PaP function is enabled.
!
Multi image type must be enabled separately for TV and HighDefTV monitor.
Multi Imagine Mode
a. By selecting AUTO PIP and PaP functions are enabled only when needed, that is
when number of video flows is greater than available monitors number, and
automatically place video flows (with precedence to remote ones).
b. By selecting ON PIP and PaP functions are enabled if at least two video flows are
available (in case of unique video flow you have a full screen image, e.g. when
system is not connected)
c. By selecting OFF PIP and PaP functions are disabled.
!
Multi image mode must be enabled separately for TV and HighDefTV monitor.
Multi Imagine: remote control "Self" key and monitor info.
Remote control "Self" key allows to show video flows in different available monitors, choosing
among different combinations.
In the lower right corner of monitor containing GUI, an icon appears with four white monitors
showing available configurations, active configuration being in red.
The icon is hidden when default configuration is active.
49