Dual Video in MCU
Dual Video functionality, based on H.239 standard, is available for multiconference calls, even in mixed
mode (only SIP participants will not see the dual stream).
To start a Dual Video session in a multiconference:
1.
Start a multiconference (see the "How to Start a Multiconference" section)
2.
Connect all desired terminals
3.
From the terminal (manager included) that want to send the second video, press remote control
"Dual" key
4.
Select the V.Input for the DualVideo and press "OK"
5.
Press "YES" icon
Note
One other icon (camera or XGA) present in the status bar means active Dualvideo
82