Aethra Vega X3 Use And Installation Manual page 80

Conference status
Encryption not active
Encryption disabled by user
Encryption only in transmission
Encryption active
To add participants using the alphanumeric keys of the remote control, go to a video control panel, and
select the "HANDSET" icon; press OK to start the call procedure.
Three options for choosing a remote user will be presented:
Phonebook
Video
Audio
Alternately, once the HANDSET icon has been selected, directly press the CALL key on the remote
control.
Repeat the above procedure for each terminal to be connected, up to the preset limit.
To add participants to the conference from fullscreen page, please press the "CALL" key: the "Audio –
Video Call" page will appear.
There are three different MCU modes:
D) Continuous Presence
When second terminal joins the conference system automatically switches to this mode, that
allows all participants to see all connected terminals at the same time. Video windows
disposition can be chosen among available by selecting the "Terminals disposition" icon.
E) Voice Switched
MCU manager detects the "active speaker" (person speaking at the moment), and sends his
video to all other participants. Active speaker terminal receives video of previous speaker.
F) Broadcasted Video
MCU manager sends selected video to all participants.
In any case MCU manager can switch among the three modes by means of the dedicated icons in the
MCU control page.
For terminal information
Stay for "conference status" table
Stay for "Encryption"
Stay for "Encryption"
Stay for "Encryption"
Stay for "Encryption"
80