Table of Contents
Advertisement
•
Stop the machine and disconnect the plug from the socket (and remove the locking device
EN
if installed). Make sure that all moving parts have completely stopped.
- whenever you leave the machine,
- before cleaning a clogged channel,
- before checking, cleaning or working on the machine,
- after passing over a foreign object. Make sure that the machine isn't damaged and
repair it before restarting and operating;
•
If the machine starts to vibrate excessively (check immediately)
DE
- look for damage,
- replace or repair any damaged parts,
- check that all loose parts are tightened.
PERSONAL PROTECTION AND FIRST AID
I
We recommend always having:
Note:
CS
- A suitable fire extinguisher (snow, powder, halotron) at your disposal.
- A fully equipped first-aid kit, easily accessible for accompaniment and operator.
- Mobile phone or other device for quickly calling emergency services.
- Accompaniment familiar with the principles of first aid.
C Accompaniment must keep a safe distance from the workplace while always seeing
you!
SK
•
Always follow the principles of first aid in case of any injuries.
•
If there is a cut, cover the wound with a clean bandage (fabric) and press down firmly to
stop the bleeding.
•
If the skin is burnt, avoid further exposure to the source of burns first. Cool the injured areas
of smaller extend with water of preferably about 4-8 °C. Do not put ointments, creams or
PL
dusting powders on the affected area. The best way is to use a wet compress, for example
a handkerchief or a towel. Then secure the sterile cover and, if necessary, seek medical
attention.
•
If persons with circulatory problems are often exposed to excessive vibration, they
may experience injury to blood vessels or their nervous system. The vibrations may cause
the following symptoms appear on fingers, hands or wrists: numbness, itching, pain,
HU
tingling, changes in skin colour or of the skin itself. If any of these symptoms occur, consult
a doctor.
•
When an electric shock is caused, it is necessary more than anywhere else to put emphasis
on safety and risk elimination for the rescuers. The affected person usually stays in contact
with electrical equipment (source of injury) because of muscle spasms caused by the electric
shock. Traumatic process continues in this case. It is therefore necessary to TURN THE
POWER OFF FIRST using any possible way. Subsequently CALL AN AMBULANCE or other
professional service, and then PROVIDE FIRST AID! Ensure free airways, check breathing,
check pulse, put the affected flat on their back, bend their head and stick out their lower
jaw. If necessary, begin with artificial respiration into the lungs and heart massage.
IN CASE OF FIRE:
•
If the motor starts to burn or it the smoke appears from it, turn the product off, disconnect
power supply and move away to safety.
•
To extinguish the fire, use suitable fire extinguisher (CO
•
DO NOT PANIC. Panic can cause even more damage.
20 / 40
, Dry Powder, halotron).
2
Advertisement
Table of Contents
