Understanding Error And Warning Messages; Warning Messages; Error Messages - Adaptec RAID 2130SLP User Manual

Understanding Error and Warning Messages

This section provides detailed information about error and warning events that occur in Adaptec Storage Manager.

Warning Messages

Warning Message Text
ArrayCritical
HotSpareTooSmall
HotSpareWontWork
InitLD
NoService
SyncLD

Error Messages

Error Message Text
AbortTask
AccessControl
AddToDiskSet
AgentRemoved
ArrayInUse
ArraysInUse
BreakRemoteMirror
CalibrateBatteryController
ChangeArraylName
ChangeBIOSMode
ChangeDiskSetName
ChangeLogicalLun
Explanation
Ready disk drives are still available
The hot spare is too small to protect the specified array
At least one logical drive is not protected by the specified hot spare
Hot spare is too small for use by at least one array
The specified logical drive was not initialized
Could not contact Adaptec Storage Manager agent. Adaptec Storage Manager may not function correctly.
Please start the agent.
Explanation
Could not stop the specified currently running task
Could not write the logical drive access control list
Could not add drives to the specified diskset
Could not remove the specified agent
Could not delete the specified array. One or more initiators are logged into a logical drive(s)
contained within this array
Could not delete all of the specified arrays. One or more initiators are logged into a logical
drive(s) contained within this array
Could not break the specifed remote mirror facet
Could not recalibrate the specified battery
Could not change the name of the specified array
Could not change the BIOS-compatibility mapping
Could not change the name of diskset
Could not change the LUN of the specified logical drive
Chapter 12: Solving Problems
●
120