Adaptec RAID 2130SLP User Manual page 123

Error Message Text
EnCopyBackMode
EnReadCache
EnUnattendedMode
EnWriteCache
EventNotSent
ExportedArray
FactoryDefault
FailbackDiskSet
FailedAtPort
FailedSelfTest
FailedSelfTestStart
FailedToConnect
FailedToReadNOT
FailedToReadSEC
FailIncompatible
FailOver
FailoverDiskSet
HostList
HotSwap
ImageSelect
ImportConfig
ImportedArray
IncreaseLogDrive
InitHardDrive
InitLogDrive
KillOtherController
LDM
LogIn
Explanation
Could not enable copy back mode
Could not enable read cache
Could not enable unattended mode
Could not enable write cache
Could not send the event to the system
Could not export the specified array
Could not restore the configuration to the factory-default settings
Could not move diskset
Adaptec Storage Manager failed to start at specified port number
Specified self-test problem code was returned from specified controller, channel, SCSI ID, S/N
One or more of the selected disk drives failed to execute the self-test. View the RaidErrA.log file
on the Adaptec Storage Manager agent for details
Failed to connect to specified host name at specified port number
Failed to read the notification list file
Failed to read the user accounts file
Failed to connect to the specified host name due to incompatible software versions
Could not fail from the active device to the passive device
Could not move diskset
Could not write the host initiator list
Could not enable the automatic rebuild on replacement operation
Could not change the firmware to the specified boot image
Could not copy the configuration from the specified drives
Could not import the specified array
Could not increase the size of the specified logical drive
Could not initialize the specified disk drive
Could not initialize the specified logical drive
Could not kill other controller
Could not start the the specified logical drive reconfiguration
The user could not be logged in
Chapter 12: Solving Problems
●
123