Adaptec RAID 2130SLP User Manual page 44

In the Physical Devices panel, select the disk drives you want to use in the logical drive.
6
Adaptec Storage Manager prompts you to select the correct number of disk drives, as
shown in the next figure. By default, Adaptec Storage Manager automatically sets the size
of the logical drive and maximizes the capacity of the disk drives you select. (To set a
custom size for the logical drive, see the second bullet below).
To create a hot spare—Control-click on an available disk drive. A plus sign (+) appears
●
to indicate that the selected drive will be designated as a hot spare. (See
more information.)
To set a smaller logical drive size—Click Advanced Settings, then enter a size for the
●
logical drive in the Size GB box. Available space will remain on the selected disk drives.
(See page 61 for more information.)
To modify other settings—Click Advanced Settings and customize the settings as
●
required. (See Fine-tuning Logical Drives on page 65
Getting Started Step 4: Building Your Storage Space
Number of disk drives required
page 74 for
for more information.)
44
●