Adaptec RAID 2130SLP User Manual page 121

Error Message Text
ChangeLogicalName
ChangeNtpServer
ChangeTimeDate
ChgAlarm
ChgDataScrubRate
ChgRebuildRate
ChgSCSIXferSpeed
ChgStripeSize
ChgTaskPriority
ClearAdapterLogsFail
ClearEnclosureLogsFail
ClearHardDrive
CommFailure
CommFailure1
ControllerRescan
ControllerRestart
ControllerShutDown
CreateDiskSet
CreateLDError
CreateSimpleVolume
DataScrub
DDDAdInternal
DDDDeviceNotFound
DDDDeviceNotReady
DDDDriveAddedToSystem
DDDDriveNotBelong1
DDDDriveNotBelong2
DDDDriveNotFound
DDDDriveNotPartOfCluster
Explanation
Could not change the name of the specified logical drive
Could not update the specified NTP server
Could not change the date and time
Could not change the alarm setting
Could not change the background consistency check rate
Could not change the rebuild rate
Could not change the SCSI transfer speed
Could not change the specified stripe size
Could not change task priority
Could not clear the event logs for the specified system
Could not clear the event logs for specified enclosure
Clear failed to start for the specified disk drive
You must re-establish communication with specified system
Restart the Adaptec Storage Manager agent to establish communication with the local system
Could not rescan for the specified controller
Could not restart the specified controller
Could not shut down the specified controller
Could not create the diskset
There was an error creating specified logical drive
Could not create a simple volume
Could not change the background consistency check mode
Failed drive—Controller internal failure
Failed drive—Device not found
Failed drive—Specified device will not come ready
Failed drive—Specified disk drive added to server
Failed drive—Specified disk drive does not belong
Failed drive—Specified disk drive does not belong
Failed drive—Specified disk drive not found
Failed drive—Specified disk drive is not part of the cluster
Chapter 12: Solving Problems
●
121