Understanding Error And Warning Messages - Adaptec 5405 User Manual

Understanding Error and Warning Messages

This section provides detailed information about error and warning events that occur in Adaptec Storage Manager.
Warning Messages
Warning
ArrayCritical
HotSpareTooSmall
HotSpareWontWork
InitLD
NoService
SyncLD
Error Messages
Error
AbortTask
AccessControl
AddToDiskSet
AgentRemoved
ArrayInUse
ArraysInUse
BreakRemoteMirror
CalibrateBatteryController
ChangeArraylName
ChangeBIOSMode
ChangeDiskSetName
ChangeLogicalLun
Warning Message Text
Ready disk drives are still available
The hot spare is too small to protect the specified array
At least one logical drive is not protected by the specified hot spare
Hot spare is too small for use by at least one array
The specified logical drive was not initialized
Could not contact Adaptec Storage Manager Agent. Adaptec Storage Manager may not function correctly.
Please start the Agent.
Error Message Text
Could not stop the specified currently running task
Could not write the logical drive access control list
Could not add drives to the specified diskset
Could not remove the specified Agent
Could not delete the specified array. One or more initiators are logged into a logical drive(s)
contained within this array
Could not delete all of the specified arrays. One or more initiators are logged into a logical
drive(s) contained within this array
Could not break the specified remote mirror facet
Could not recalibrate the specified battery
Could not change the name of the specified array
Could not change the BIOS-compatibility mapping
Could not change the name of diskset
Could not change the LUN of the specified logical drive
142
Chapter 11: Solving Problems
●