In the Adaptec Storage Manager tool bar, click Configure, select the system you want, then
2
click Notifications.
The Notification Manager opens on the Notifications tab of a new window. The local
system is automatically included on the Notification List—by default, all local events are
listed in the local Event Viewer.
Add the names of the other systems in your storage space that will receive event
3
notifications generated by this system to the Notification List:
In the tool bar, click Add system.
a
In the Add System window, enter the host name or TCP/IP address of the first system.
b
If you are not using the default port number, 34571, enter the TCP/IP port. Then, click
Add.
If you want more than one system to receive the event notifications, repeat
c
required.
When done, click Cancel to close the Add System window.
d
The systems you added appear in the Notification List. Although you can't sort the list, you
can reorganize the columns by clicking and dragging the column heads.
Chapter 8: Monitoring Your Storage Space
Notifications Tab
84
●
Notification List
Notification Log
Step b
as