Noprompt: No prompt for confirmation
Examples
ARCCONF CREATE 1 LOGICALDRIVE STRIPESIZE 64 MAX 0 1 0 1 1 1 2 NOPROMPT
ARCCONF CREATE 1 JBOD 0 1 NOPROMPT
arcconf delete
Deletes a logical drive or JBOD. All data stored on the logical drive or JBOD will be lost.
Spanned drives cannot be deleted with this function.
Syntax
ARCCONF DELETE <Controller#> LOGICALDRIVE <LogicalDrive#> <LD#> <LD#> [noprompt]
ARCCONF DELETE <Controller#> JBOD <CHANNEL# DRIVE#> [CHANNEL# DRIVE#] ...
[noprompt]
ARCCONF DELETE <Controller#> LOGICALDRIVE|JBOD ALL [noprompt]
Parameters
Controller# is the controller number
LogicalDrive# is the number of the logical drive to be deleted.
LogicalDrive|JBOD ALL deletes all logical drives or JBODs.
Noprompt is an optional parameter that suppresses alert messages.
Example
ARCCONF DELETE 1 LOGICALDRIVE 1 2 3
ARCCONF DELETE 1 JBOD ALL
arcconf driverupdate
Updates Windows device drivers. When given a directory name, it will attempt to update a
driver to the version found in the given directory.
Note:
This command is available only on Windows systems.
Syntax
ARCCONF DRIVERUPDATE <DirName>
Parameters
Driverupdate <DirName> is the directory path containing the driver that you want to update.
Example
ARCCONF DRIVERUPDATE C:\WINDOWSALL
Chapter 2: Using the Command Line Utility
13
●