hrconf getconfig
Lists information about the controllers, logical drives, and physical devices. This information
can include (but is not limited to) the following items:
Controller type
●
Logical drive status, RAID level, and size
●
Physical device type, device ID, presence of PFA
●
Physical device state
●
Syntax
HRCONF GETCONFIG <Controller#> [AD/LD/PD/AL]
Parameters
Controller# is the controller number
AD/LD/PD/AL options:
AD—Adapter information only
●
LD—Logical drive information only
●
PD—Physical device information only
●
AL—All information (optional)
●
Example
HRCONF GETCONFIG 1 AD
hrconf getstatus
The GETSTATUS function displays the status of any background command that is currently
running.
Syntax
HRCONF GETSTATUS <Controller#>
Parameters
Controller# is the controller number
Example
HRCONF GETSTATUS 1
hrconf getversion
Returns the version information for all controllers or the optionally specified controller.
Syntax
HRCONF GETVERSION <Controller#>
Parameters
Controller# prints the version information for the specified controller
Example
HRCONF GETVERSION
Chapter 2: Using the Command Line Utility
25
●