The Main And System Menus; Main Menu - Adaptec AHA-3980 User Manual

The Main and System Menus

The Administrator utility has two primary menus: the Main Menu,
shown in Figure 7-21, and the System Menu, shown in Figure 7-22. If
your system has only one array, the Main Menu appears when you
start the Administrator utility. If your system has multiple arrays,
the System Menu appears when you start the utility.
Main Menu For Array #1
Display Array Status
Verify Functions
Reconstruct Functions
Format/Initialize Array
Convert RAID Level
Change Array Configuration
Figure 7-21. Administrator Utility Main Menu
Select Target Array
Display Array Status
Change Array Configuration
Install Utility Suite
Figure 7-22. Administrator Utility System Menu

Main Menu

The Main Menu lists the tasks you can perform for an individual
array:
Display Array Status: Display information on the array and on
disks included in the array. For details, see Obtaining Array
Information on page 8-1.
Verify Functions: Verify the data on the array (RAID 5 and mir-
rored arrays only). For details, see Verifying Arrays on page 9-1.
Reconstruct Functions: Re-create data on a replacement disk.
For details, see Reconstructing Data on a Replacement Disk on
page 9-4.
AHA-3980/3980W/3985/3985W User's Guide
Stock Number: 510810-00, Rev. D
Print Spec Number: 493479-00
Current Date: 3/1/99
Understanding the Administrator Utility
Scheduler Functions
Reactivate Off-line Array
Reactivate Spare
Hardware Functions
Install Utility Suite
System Menu
Page: 7-3
ECN Date: 3/19/96
7-3