Completing The Slimscsi Installation In Windows 3.1 - Adaptec APA-1460A User Manual

Completing the SlimSCSI Installation in
Windows 3.1
1
If Windows 3.1 is not already running, start it now.
2
Insert the Adaptec EZ-SCSI diskette #1 in the PC's floppy disk
drive.
3
Select File/Run from the Program Manager menu.
4
When the Run dialog box appears, type a:\setup, and click OK.
5
Follow the instructions that appear on the screen.
6
When EZ-SCSI is installed and your PC recognizes the
SlimSCSI adapter, continue with Using the SlimSCSI 1460 on
page 13.
Note:
If your PC does not recognize the SlimSCSI adapter
and SCSI devices, there may be a resource allocation prob-
lem. Review the General Hardware Troubleshooting on
page 18. If the adapter is still not recognized, install
CardWizard Pro software (included with your SlimSCSI
adapter) by following the directions in Troubleshooting with
CardWizard Pro on page 23.
Completing the Installation
7